By flip-flop adjustment of centrifugal force, the use range of table vibrator is extended, and placing of various products on the table are possible.
Generally the output power of a general-purpose vibration motor is decided by size of an output. However, this motor has attaches in the both ends of a driving shaft (rotor axis) the eccentric weights, and it is designing it so that shake the motor itself. Therefore, one motor can be used and the strength of vibrating power can be changed only by exchanging the eccentric weight figure. Eccentric weights which can move freely mechanically is attached. Vibrating power was given for strength by changing the rotative direction of a motor.

Flip-flop adjustment of centrifugal forces is easy

In change of the mass (load) on table, it is the change (the rotative direction of a motor is made reverse) by a reverse switch. Centrifugal force changes. It corresponds to various kinds of product mass.

Change of the rotative direction by frequency

Counterclockwise rotation=0° weight angle:you can get max put power when use up to 60Hz imput.
Clockwise totarion=100°weight angle:you are using 64% of centrifugal force.Never use over 75Hz imput.

Frequency is variable when use with inverter

Frequency can be adjusted using general-purpose inverter of output 3 phase 200V. Please set to proper frequency according to the application and the purpose of vibration.

Outdoor installation is possible by the waterresist structure.(IP66)

Safe use on the outdoors is possible by the totally closed splash proof structure of the protection grade IP66. The protection grade IP indication IP (International Protection) is the foreign substance invasion protection grade of electric apparatus or cabinet to the solid foreign substance and water which were specified by the IEC standard 529. IP6 (first symbol) 6 (second symbol) 6 of the first symbol: Protection to human body and solid foreign substance. As for the grade of protection, a particulate does not trespass upon an inside. The second symbol 6 is protection to permeation of water. The grade of protection does not receive harmful influence by either billow or strong direct jet stream of water from any directions.

Attachment of fall prevention wire is possible

Prepared fall prevention wire just in the case of the fracture of the attachment bolt is as the option.