Since Piston vibrator ELV8 type generates high amplitude vibration in linear movement, and shows a high performance which is removing adhesion and preventing occlusion of a hopper, a tank, and plumbing shot.

The operating sound is very quiet, and there is little air consumption, so this is the environment-friendly air-type vibrator.

The ELV series, linear type piton vibrator, is sticking out to the outside of a cylinder, it can gain high amplitude by a high stroke movement.

Moreover, it can generate two kinds of amplitude by the attachment direction.

Like EPV series, ELV series is environment-friendly at oil free operation, and superior also in corrosion resistance, and used in various general industries, such as chemistry, medicine, and the food industry. (If lubricator is used together, durability will increase.)

The performance of air type vibrator of a piston vibration mechanism is proved by the piston vibrator EPV series which has a track record for years.

Piston vibrator is used also for granular material filling work or oscillating transportation equipment in addition to the purpose of the prevention from adhesion, or the prevention from occlusion.

The best for the prevention from adhesion of a small container

The ELV8 type diameter of a piston is 8 mm, and is small and lightweight (100g), compared with the conventional model, it can be attached into a small granular material container, a shot portion, etc. Setting of detailed oscillating power is possible by adjusting the pressure of supply air. According to the characteristic of an installation object, adjustment subtle to the optimal vibration is possible.

A wide usage

(1) Fix a main part case to a thing to be vibrated, and a piston moves going and coming. (2) Fix the piston side to a thing to be vibrated, and a case moves going and coming. Usually, although it uses fixing a main part case, when big amplitude is required, by using fixing a piston, amplitude is doubles.

	"Fix housing (left)", "Fix piston (right)"

Top class durability

Highly precise processing and wear-proof processing by special technique are performed, and it is top class durability.

Oil free operation

Oil is unnecessary when operating this linear type piston vibrator ELV. Since an exhaust port is equipped with a filter and there is no oil mist in supply air, this vibrator does not have bad influence on surroundings. This is broadly applicable to an industrial machine, medicine manufacture, food, and chemistry. (If lubricator is used together, durability will increase.)

Low noise and a low amount of consumption

A noise level is 60-70 dB, and exhaust sound is quietness, the air consumption 4 - 76 L/min (ANR), this is an environment-friendly design. Since this is an energy-saving design, it reduces the expense of maintenance and management and contributes to an improvement of the working atmosphere in a factory.

Explosion prevention

This vibrator moves only by compressed air, and since it is in the condition which has pressure in an inside, dust does not go into a cylinder part. That is, since this has little fear of ignition like an electrical type, this is used also at the place by which the danger of dust explosion is accompanied.

Easy installation

Installation is possible with one bolt. Installation is possible in every direction by using a mount.

Various applications

This is applied as sources of vibration, such as a small oscillating feeder as an oscillating transport plane, and a small shaking table aiming at filling and diffusion.

Stepless adjustment

The air type piston vibrator can change pitch and oscillating power by changing air pressure. The merit with variable oscillating power can correspond only by change of air pressure at the place where conditions differed, and can unify an adoption model.

Stop in an instant

Since piston vibrator has a function which I stop in an instant when supplying power is stopped, it is effective in the oscillating transportation with measurement work. (By stopping in an instant, a resonance action of the equipment at the time of a stop and exaggerated feeding of a work are avoidable.)