Air direct Blaster resolutions a blockage made by adhesion or clog of bulk material, by blasting its compressed air. Large destructive power and well suited in safety. Especially, produce an effect in bulk material which is firmly clogged by giving vibration. Easy operation and enable to control plural units at the same time. Selection of a model is arranged from 2.5L to 230L tankage, regarding to the size of tank, hopper, and blockage circumstances.

New valve-mechanism improved maintenance

Former direct Blaster, once placed in silo(hopper) took time to replace its consumable part, since it needed to remove the blaster body and in many cases was placed in high area. By adopting new valve mechanism, it became easier to change a consumable part inside the valve and maintenance has improved.

A pressure tank passes its criteria second-class-pressure-vessel inspection

Pressure vessel regulation is defined in Japan and other most of countries. All models of air-filling pressure tank are designed, manufactured, and must passed second-class- pressure-vessel design. More than 40L pressure tank container is applicable, however our company set a standard for all models(20L-230L) safely used by our customer. Meter is attached outside to confirm the air-filling inside of the pressure tank.(All models have standard equipment)(Please pay attention for keeping test-result-paper in your office)

Blockage resolution effect is Large!

Not vibrating from the outside container nor striking, direct blaster operates effectively to the content and less dead stock inside the silo. In case of aggregate silo in ready-mixed-concrete work, enables to operate from intensive control room. Adopted in many ready-mixed-concrete works and appreciated by many users.

First and foremost keep safety in factory

Human accidents in silo to resolution blockages have not decreased. Blockage in silo is made by arching and its balance. If its balance breaks up by human work, content floods away and leads to major accident. To prevent such as accidents,Blaster is adopted in many fields.

Variable injection force by pressure regulation

Adopting valve, injection force can be regulated by changing the pressure of supplied air. Request for large or small machinery can be regulated by changing its pressure without any replacement construction.

Nitrogen gas can also be used

For contents including burnabilities and explosion risks, nitrogen gas can be used as injection air. Blaster can assure explosion protection when blockage is resolution. This leads to cost reduction and has a good track record in incineration plant.

As an option, exclusive nozzle is prepared

Preparing various exclusive nozzle, which can be chosen according to the situation of adhension, clog, or mounting location.

*Please contact our us, for producing special nozzle high heat resistance of over 1000 degrees celsius.