Ball vibrator is compact vibrator that generates powerful centrifugal force vibration in the high speed revolution of the steel ball by compressed air. This is equipment with easy handling due to the simple principle and structure. Although this is generally used for blockade prevention of hopper, chute, etc., the application extends according to idea. Frequency and centrifugal force are freely changeable only by operation of air pressure. According to the installation conditions of the site, it can select from 3 models that have different air supply positions. (Lubrication by oilier is indispensable)

The easy principle decreases failure

The principle which a steel ball in cast body turns at high speed by supply of air, and generates vibration does not requires complicated parts, and decreases failure.

Adjust power of vibration by pressure regulator of supply air

Set air pressure can be raised when vibration is weak, and the pressure can be lowered when vibration is too strong, then the best vibration adjustment in the site can be made simply.

Easy maintenance

Replacement of ball is possible for all models. Maintenance is easy because replacement of ball can be made only by loosening one bolt of the center and removing side cover. (Notes: When wear of internal raceway ring is remarkable, the maintenance only by ball replacement is inadequate.)

Application extends according to your idea

The ball vibrator generally used for blockade prevention of bulk material stored in hopper or chute, is also applicable as a prime mover of the vibration table used for filling as another application. There is an application, such as giving vibration as dissolution of part supply stagnation of a production line etc.

Selection of model suitable for the installation conditions at the site is possible

When there are restrictions in the pulling-out direction of an air tube, UH type (Supply air from top) or CH type (Supply air from side) can be chosen. In the case of the conditions which can be attached only with one bolt, there is also BH type of one-point installation.

Complete airtight waterproofing structure

Because this ball vibrator is waterproofing structure, it can be used even in the watery spot. If the hose of air intake and exhaust is extended, this will be installed underwater. (Notes: In exhaust extension, some vibration efficiency falls.)

Safety wire hole

The ball vibrator of all models has a hole for attaching fall prevention wire. We recommend attachment of all prevention wire for safety. (The wire is sold as an optional)

Lightweight and compact

The installation width of smallest type BH8 is 18mm and the weight is 0.3kg. Thereby, this can be installed also in the small hopper and the narrow place in which the regular vibrator cannot be installed. UH type and BH type can choose various the directions of air supply and exhaust respectively, selection of model suitable for attachment conditions is possible. Also, high air tightness enables underwater application. (When exhaust pipe is extended into the atmosphere)