Turbine vibrator is a pneumatic vibrator does not require lubricant.Turbine vibrator is a pneumatic vibrator does not require lubricant.The directions are easy and it only supplies compression air like the conventional ball vibrator.
(Lubrication is strictly prohibited to use air)
Because the turbine rotated at high speed does not contact the housing portion, its noise is low.This is vibrator friendly to working environment.
The housing, turbine, and air coupling of this vibrator conform to food hygiene law.Because this has adopted stainless steel material as external components, such as a silencer and cover metal fittings, it is the pneumatic vibrator which can use for food, pharmacy, chemistry, and the precision component industry feeling easy.
This turbine vibrator has 2 models, the resin made BTP and the stainless steel (SUS304) made BTS.In addition, stainless steel material is all used for the coupling, silencer, and cover.
Turbine vibrator is flow aid apparatus demonstrates capability to the place where needs little vibration to prevent blockade and/or adhesion of granular material, or blockade prevention of hopper and/or chute.

Operation noise is very low

Because turbine vibrator does not have metal contact of the housing and rotation portion like other pneumatic vibrator and has equipped the highly efficient silencer as standard, its operation noise is very low.

Adjust vibration power iby the pressure regulation of supply air

Turbine vibrator can change the frequency and centrifugal force simply only by adjusting the pressure of supply air.After attaching this in equipment, the vibration force can be adjusted by supply air pressure.

Simple principle

The easy principle which rotates a turbine at high speed by compressed air reduces failure of the vibrator itself.

Lightweight and icompact size

Smallest lightweight BTP18 is plastic body with the size of 32 x 17x 48.6mm and the weight of 50g.So, this can be installedalso in the narrow place in which the conventional vibrator cannot be installed.

Various installation

Installation of turbine vibrator is made by fixing a bolt in the hole in front of the body (1 pc.), or the holes of the bottom (2pcs.).Installation can be adjusted in consideration of shape of the installed object, or the space and the vibration effect.Convenience increases further with the device of attachment and detachment.

Application extends on one idea

This is also applicable as a driving force of the vibration table used for filling of powder and bulk.This is applicable to the acceleration of flow of various materials or parts too.

Outstanding corrosion resistance

Polyacetal resin and stainless steel excellent in the corrosion resistance used for the body enable long-term operation in a moist place.