By transmitting a powerful mechanical vibration of a motor directly to a diaphragm, Surface Finish Handy Vibrator is a most effective in remove entrapped air of a face-of-slope part and the surface finishing from which cannot escape easily. It is mainly suitable for placing of broad fields, such as an end-dam plate, a shelf board, a U-shaped gutter, etc. of a concrete precast product.

Optimum for the thin product of narrow mold and face-of-slope part placing

Effective in remove entrapped air of the face of slope from which a cannot escape easily. In order that the mechanical vibration given from a punch plate may collect entrapped air and may pull up with a plate, it becomes beautiful surface finish.

Vibration reduction at a handle

By adopting our original and specially designed rubber flange,we succeeded in reducing the vibration both at the vibrating body and handle.Moreover, vibration reduction rubber between the motor case and the handle.

Dual isolation structure

We adopted dual isolation structure. one is a resin insulation between an armature shaft and a winding core. The other is a resin insulation between a motor casing and a filed core. Furthermore,by equipping the insulation cover inside the internal lead wire, we increased the safet

Carbon brush

We adopted an carbon brush to abolish the contact failure by an armature and the damage on a commutator by wear of a brush.

In low noise

By adopting anti-dust-double-filter,we succeeded in preventing the mortar invading into the core of a motor. Moreover, by innovating enhansed exhaust port, we succeeded in reducing an operation sound to 5dB.

An easy maintenance

Adhered concrete is easily removed since the bearing case and inlet portion are fluorine coated. An exhaust port configuration is simply designed which enables maintenance easier.